How to configure Time Clock to move to next column of stamping?

Modified on Wed, 08 May 2024 at 03:14 PM

When entered into setting mode, make sure you are in group 13-18, as these groups are designed to set specific time to move to next column for stamping.


To modify the hour, press buttons 1 and 2, and to save, press button 3. 

To modify the minute, press buttons 1 and 2, then press button 3 to save and move to the next group setting.


Note that the card moving time must be earlier than the Clock IN time. (Groups 13 to 18 should have the same settings as group 06 (ring time). Group 13 indicates printing moved to the first column, and group 18 indicates printing moved to the last column.)


For example, if you would like to set clock in time to start at 9AM and clock out time to start at 5PM, you would need to set Group 13 to 9AM and Group 14 to 5PM, and so on. Otherwise, the time clock will be stamping on the same location if not set properly. 



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article