How to connect the printer to PC via Ethernet cable?

Modified on Fri, 25 Aug, 2023 at 2:38 PM

Note: If you are attempting to connect the printer via LAN/Ethernet Cable, the printer needs to be connected to the router instead of the computer. 

  1. Insert the power cable into the thermal printer.
  2. Connect the printer to your internet router via Ethernet cable.
  3. Place a thermal paper roll into the printer, and turn on it.
  4. Default IP address for the printer is 192.168.1.114, make sure it is the same subnet as your network(192.168.1.XXX)
  5. If yes, proceed with inputing the IP to the compatible POS software 
  6. If not, please make changes to the IP address of the printer. You may download the IP EasyConfig for Android or SimpleNetwork IP Config for Windows to make changes to the IP address.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article