Method of handling cutter anomalies

Modified on Fri, 29 Mar at 3:33 AM

Method of handling cutter anomalies

1. Restart the machine and check whether the cutting tool is reset.
2.Open the front cover and turn the gear on the cutter to reset the cutter

Front cover open mode

1.Press and hold the left side of the front cover, push and lift the front cover in the direction of the arrow

2. Clean the residual paper scraps and oil regularly to prevent excessive residue from causing abnormalities

3. If the clamshell can not be opened or closed, please contact professionals, do not force the opening and closing, so as not to cause deformation of the part.